Journals

Lal Sharma, S., & Debbarma, A. (2024). Numerical Investigation of Reversed Flow Solar Air Heater Roughened With Circular-and Triangular-Shaped Tubes. Journal of Solar Energy Engineering, 146(2), 021003. 

Jasyal, N. K., Sharma, S. L., & Debbarma, A. (2023). Performance analysis of solar air heater using triangular corrugated absorber under jet impingement. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(3), 9063-9080.

Rautela, M., Sharma, S. L., Bisht, V. S., Debbarma, A., & Bahuguna, R. (2023). Numerical Analysis of Solar Air Heater Roughened with B-Shape and D-Shape Roughness Geometry. Journal of Heat and Mass Transfer Research, 10(1), 101-120. 

Swapnil, S., & Debbarma, A. (2023). Experimental Study of Quenching Progression on a Heated Flat Dimpled Surface with Water Jet Impingement. Journal of Heat and Mass Transfer Research, 10(1), 21-29. 

Chaurasia, S., Goel, V., & Debbarma, A. (2023). Impact of hybrid roughness geometry on heat transfer augmentation in solar air heater: A review. Solar Energy.

Kishan, D. L., Swapnil, S., & Debbarma, A. (2023). CFD Investigation of Rewetting Behavior on a Hot Vertical Plate Surface with Coolant Jet Impingement. In Emerging Trends in Mechanical and Industrial Engineering: Select Proceedings of ICETMIE 2022 (pp. 85-97). Singapore: Springer Nature Singapore.

Sharma, S. L., & Debbarma, A. (2022). A review on thermal performance and heat transfer augmentation in solar air heater. International Journal of Sustainable Energy, 41(11), 1973-2019.

Sharma, S. L., Singh, S., Debbarma, A., & Mehra, K. S. (2022). Experimental Assessment of Thermal Performance and Fluid Flow Characteristics of Perforated Hollow Elliptical Insert in a Tube Heat Exchanger. Arabian Journal for Science and Engineering, 1-12.

Dixit, A., & Debbarma, A. (2022, July). Experimental Investigation of Cooling Photovoltaic Panel Using Turbo-Ventilator. In International Conference on Advances in Energy Research (pp. 47-59). Singapore: Springer Nature Singapore.

Kishan, D. L., Sharma, S. L., & Debbarma, A. (2022). CFD Investigation on Rewetting Temperature and Wetting Delay during Quenching of Hot Surface with Jet Impingement. In Advances in Mechanical and Industrial Engineering (pp. 29-34). CRC Press.

Kumar, K., & Debbarma, A. (2022, February). Performance Investigation of Sinusoidal Corrugated Absorber Plate Solar Air Heater. In Journal of Physics: Conference Series (Vol. 2178, No. 1, p. 012014). IOP Publishing.

Sharma, S. L., & Debbarma, A. (2022). Effect of P-Leg material and resistance ratio on a segmented thermoelectric generator. Materials Today: Proceedings, 66, 1023-1030.

SWAPNIL, S., & DEBBARMA, A. (2021). Surface modification techniques for cooling by impinging jets-a review. Journal of Thermal Engineering, 9(5), 1372-1385. 

Dwivedi, H., & Debbarma, A. (2021). NUMERICAL STUDY OF HYDRODYNAMICS AND HEAT TRANSFER CHARACTERISTICS DURING COOLING OF CURVE SURFACE WITH WATER JET IMPINGEMENT. In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc..

Debbarma, A., & Pandey, K. M. (2018). CFD analysis of rewetting behavior in nuclear fuel rod bundle with change in operating conditions. Kerntechnik, 83(1), 36-49.

Choubey, G., Pandey, K. M., Maji, A., Deshmukhya, T., & Debbarma, A. (2017). Computational investigation of multi-strut injection of hydrogen in a scramjet combustor. Materials Today: Proceedings, 4(2), 2608-2614.

Debbarma, A., & Pandey, K. M. (2017). CFD Analysis of Rewetting Temperature and Wetting Delay during Emergency Cooling of Vertical Nuclear Fuel Rod Bundle with Water Jet Impingement. Materials Today: Proceedings, 4(2), 4144-4152.

Sharma, D., Pandey, K. M., Debbarma, A., & Choubey, G. (2017). Numerical Investigation of heat transfer enhancement of SiO2-water based nanofluids in Light water nuclear reactor. Materials Today: Proceedings, 4(9), 10118-10122.

Debbarma, A., & Pandey, K. M. (2017). CFD Study on Emergency Core Cooling of Hot Vertical Nuclear Fuel Rod Bundle by Jet Impingement. Materials Today: Proceedings, 4(2), 2534-2543.

Debbarma, A., & Pandey, K. M. (2016). CFD analysis of rewetting of a single sector AHWR fuel cluster with changing jet directions. Nuclear Engineering and Design, 308, 51-59.

Debbarma, A., Pandey, K. M., Sharma, D., & Choubey, G. (2016). CFD analysis of rewetting vertical nuclear fuel rod by dispersed fluid jet impingement. Perspectives in Science, 8, 110-112.

Choubey, G., Pandey, K. M., Sharma, D., & Debbarma, A. (2016). Computational simulation of multi-strut central lobed injection of hydrogen in a scramjet combustor. Perspectives in Science, 8, 222-224.

Debbarma, A., & Pandey, K. M. (2016). Numerical analysis on the effect of flow rates and jet diameter in rewetting vertical nuclear fuel bundle with jet impingements. Annals of Nuclear Energy, 94, 518-529.

Debbarma, A., & Pandey, K. M. (2016). CFD study of rewetting nuclear fuel rod bundle by zig-zag jet impingement. Indian Journal of Science and Technology, 9(16), 1-7.

Debbarma, A., & Pandey, K. M. (2016). Influence on rewetting temperature and wetting delay during rewetting rod bundle by various radial jet models. Kerntechnik, 81(1), 50-59.

Debbarmaa, A., & Pandey, K. M. (2013). Numerical Analysis of Flow and Heat Transfer in Sub-channel of Supercritical Water Reactor. Procedia Engineering, 64, 507-517.

Debbarma, A., & Pandey, K. M. (2013, November). Numerical Analysis of the Flow and Heat Transfer in the Sub-Channel of Supercritical Water Reactor. In ASME International Mechanical Engineering Congress and Exposition (Vol. 56345, p. V08AT09A048). American Society of Mechanical Engineers.

KM, P., Ajoy, D., Hirakjyoti, D., Amitava, R., & Writuparna, N. (2013). Environmental impact assessment and management: protecting ecology in North-East India. Journal of Environmental Research And Development, 7(4).